Stainless Steel High Efficiency Corrosive Materials Melting Plant For Dangerous Chemical Melting
Description
FT series corrosive materials melting machine, without self heating system, which consists of melting tank, sliding supporting platform and electrical apparatus control system. The melting tank is divided into two chambers. The upper one is melting chamber for barrel material, the heating coil exchange heat with the barrel in radiation way to achieve the purpose of material melting. The lower chamber keeps up heating to reach the temperature of suction pump(110 degree), then the pump pumps the liquid material into the storage tank, if increasing the heating time, you can get higher temperature.
Melting plant components
The equipment mainly consists of melting tank, lifting system, tipping devices, drum plate, dripping liquid collect system, hydraulic propulsion system, thermal oil heating system, liquid pump, pipe system, and electric control system.
Working principle
The equipment adopts automatic spring door sealed box structure. The drum is lifted by electrical hoisting. The hydraulic propeller pushes drum plate into the melter, and using the hot thermal oil from external boiler as the heating source.
Continuous production one full drum in and one empty drum out from the other end.
Features
1. The drums loading operation is made by the electric lifting system. The empty drums are pushed out on the back side.
2. The heating required to melt the corrosive material is provided by heat conducting oil.
3. The equipment consists of upper and lower two rooms, the upper one for melting the barrels, surrounded by evenly distributed thermal oil coils, heating coils and the barrel mainly using the thermal radiation heating mode to melt the corrosive material from the barrels. The lower room is mainly for increasing the heating temperature of the corrosive material that melted from the barrels till reach to (110 degree), then liquid outlet pump will transfer the corrosive material outside to be ready for use if extend the heating time can be obtained a higher temperature to (160 degree).
4. Easy to put the barrels inside the equipment without any platforms with high efficiency.
5. No need for trolley or any wrench to carry the barrel inside the plant.
6. Simple structure, with automatic spring door, easy to maintain.
7. Environmental protection and good, enclosed structure, no pollution.
8. Facilitate the relocation: container structure assembled quickly.
| Model | FT-3 | FT-5 | FT-10 | FT-15 |
| Production capacity (t/h) | 3 | 5 | 10 | 15 |
| Tank capacity (m3) | 8 | 10 | 15 | 20 |
| Drum quantity | 14 | 18 | 28 | 42 |
| Number of drum rails | 2 | 2 | 2 | 3 |
| Dimension (L x W x H) (m) | 7.9×2.2×2.55 | 9.1×2.2×2.55 | 12×2.2×2.55 | 12×2.8×2.55 |
| Total power (kW) | 15 | 15 | 17 | 17 |
| Thermal oil heater capacity (Kcal/hr) | 400,000 | 400,000 | 600,000 | 800,000 |
Our advantages
Our factory, DEZHOU FEITENG ROAD CONSTRUCTION EQUIPMENT CO., LTD., specializes in designing and manufacturing asphalt equipment, mainly including asphalt melting equipment for drum/box/bag packing, asphalt tank, asphalt emulsion equipment and asphalt sprayer, also we have the big advantages as below,
1. Independent design and professional manufacturer.
2. Production capacity over 200 sets per year.
3. All equipments with compact structure, suitable for container load.
4. Select premium steel with high quality.
5. Complete production control with detailed record and video.
6. Our factory had passed ISO system authentication, including ISO9001, ISO 14001, OHSAS18001.
7. We manufacture our standard equipment, also welcome OEM and ODM.
Our service
Our factory, DEZHOU FEITENG ROAD CONSTRUCTION EQUIPMENT CO., LTD., specializes in designing and manufacturing asphalt equipment, you may get as below,
1. Design drawing as your requirement
2. Equipment solution as your real condition
3. Quality equipment as your order
4. Quick response as your time
5. Fast delivery as your demand
6. Complete warranty as your expect
Quality product, quick response and cost saving.
Delivery and shipping
1. Production time around 5-15 days per set
2. Suitable for 40 HQ container loading
3. Trade terms EXW, FOB, CFR, CIF
After sale service
1. Warranty one year
2. Online support service and video technical support
3. Free spare parts
4. Field installation, commissioning and training, field maintenance
Product Tags:
|
|
Stainless Steel Decanting Plant , Insulation Asphalt Production Plant Images
|
